[Hail2theskins]

dude, slim budget? ive done this and it works great, get yourself two pieces of about .5 inch thick particle board about 4 feet by 5 feet, 3 door hinges, about 50 feet of rubber stripping and about 30 feet of cheap molding, the paint you want and some poly eurathane, put the molding around the one 4 foot side and both 5 foot sides of the particle board, then hinge together the two boards at so the dimensions of the table when flat are 4x10 (hinge the boards on the top side of the table, next put the rubber stripping over the crease in the boards and all along the molding along the sides, (tip, buy thin ply wood and cut yourself out a triangle that you can fit the six cups in and cut out 6 circles the size of the bottom of a dixie or solo cup whichever you prefer, so that the cups have a nice place to sit, and tack those onto either side with some finishing nails so your cups have a nice place to sit) next paint it how you want to paint it and put about 3-5 coats of CLEAR poly eurathane on top and there ya go, a portable, easy to store beer pong table add legs with locking hinges if you want to really be fancy

the reason for the rubber stripping is to prevent beer from flowing freely onto the floor, obviously beer pong is a messy game but this really helps